APB Interrupt Controller

with No Comments

Overview The PE-INT-APB is a Programmable Interrupt Controller which adopts AMBA APB bus. PE-INT-APB supports two types of interrupt: Fast Interrupt Request and Normal Interrupt Request with vectored control. The number of interrupt source can supported up to 64 sources … Read More

APB Smart Card Reader

with No Comments

Overview The SCR IP implements an interface and controller for communicating between smart card device and the CPU through host system bus. The core is compatible with the AMBA APB 2.0 bus. It operates as a controller for writing data … Read More

8-bit CAN Controller

with No Comments

Overview PE-CAN-8B is designed to be compatible with CAN 2.0A and CAN 2.0B standard. This IP core has the parallel port which is used to connect easily to microcontroller. Four transmitted and received buffers with the programmable priority level support … Read More

AHB Interrupt Controller

with No Comments

Overview The PE-INT-AHB is a Programmable Interrupt Controller which adopts AMBA AHB bus. PE-INT-AHB supports two types of interrupt: Fast Interrupt Request and Normal Interrupt Request with vectored control. Specially, it can connect directly to CPU for handling interrupt faster … Read More

32-bit UART Controller

with No Comments

Overview The PE-UART-APB core is a serial communication controller with a serial data that is intended primarily for embedded systems and designing ASIC. The PE-UART-APB core can be used to interface directly to industry standard UARTs. The IP was carefully … Read More

32-bit CAN Controller

with No Comments

Overview PE-CAN-APB is designed to be compatible with CAN 2.0A and CAN 2.0B standard. This IP is easy to integrate into SoC via the AMBA APB bus. Specially, it has dual receiver FIFOs to distribute received data. Key Features CAN … Read More

8-bit Interrupt Controller

with No Comments

Overview PE-INT-8B is the programmable interrupt controller which is equivalent to 8259A (Intel). Key features Eight-level priority controller Compatible with MCS80/85 system and MSM88A-10/86A-10 system Expandable to 64 levels Programmable Interrupt mode Masking interrupt source Performance Logic Memory Fmax DSP … Read More

QCM Device

with No Comments

Overview QCM device derive from English is Quartz Crystal Microbalance that means quartz crystal micro balance. A key feature of this device is derived from the name of micro balance, mean that measures the volume size is as small as … Read More

Second AICD – 2011 INTRODUCTION

with No Comments

Welcome to the second AICD-2011 Contest! After the success of the first analog IC design contest (AICD-2010) sponsored by Analog Devices Inc. and Synopsys Inc., Vietnam National University Ho Chi Minh (VNU-HCM) decides to organize the second AICD-2011 contest for … Read More

AMBA APB Controller

with No Comments

Overview The PE-APB is used to connect low speed peripheral in AMBA bus system. This IP also support to configure read-only memory space. The contents of memory are protected from changes.   Key Features   The PE-APB includes the following features: … Read More

1 2 3 4