DDR SDRAM Controller

with No Comments

Overview DDR_SDR_C operates at a high performance interface to DDR SDRAM memory devices. The local bus interface transfers read and write commands to the controller. Then DDR_SDR_C receives these commands and translates them the command sequences required by DDR SDRAM … Read More

AMBA AHB Controller

with No Comments

Overview The PE-AHB IP includes the arbiter, decoder and logic controller as described in the AMBA 2.0 Specification. The IP is highly configurable providing design engineer the flexibility to use it in their desired system. Key Features All types burst … Read More

DCT/IDCT

with No Comments

Overview The DCT-FI IP was a low-cost, high performance 2D Forward/Inverse Discrete Cosine Transform. Able to operate over 8×8 blocks of samples/DCT coefficients, the DCT-FI is compliant with most of image/video compression standard. The switching of the direction is easily … Read More

32-bit I2S Controller

with No Comments

Overview The PE-APB is used to connect low speed peripheral in AMBA bus system. This IP also support to configure read-only memory space. The contents of memory are protected from changes. Key Features The PE-APB includes the following features: Compliance … Read More

DMA Controller

with No Comments

Overview  The PE-DMA is a DMA Controller which adopts AHB bus.  The IP was carefully tested by our robust regression test system, verified both the functionality of the controller and the compatibility of the IP with AHB interface. The PE-DMA … Read More

32-bit I2C Controller

with No Comments

Overview The I2C Controller provides a serial interface according to the Philips I2C specification to communicate with low-speed peripherals. The core can be also integrated into the SoC system through AMBA APB bus. The I2C-APB Controller supports all transfer modes … Read More

PCI Device 2.3

with No Comments

Overview The PCI Controller core handles the data transfer between host CPU and the PCI bus device. It performs two flow of transfer: PCI target interface receives data from PCI local bus, encrypt in encrypted block (or not), respond read … Read More

APB Interrupt Controller

with No Comments

Overview The PE-INT-APB is a Programmable Interrupt Controller which adopts AMBA APB bus. PE-INT-APB supports two types of interrupt: Fast Interrupt Request and Normal Interrupt Request with vectored control. The number of interrupt source can supported up to 64 sources … Read More

APB Smart Card Reader

with No Comments

Overview The SCR IP implements an interface and controller for communicating between smart card device and the CPU through host system bus. The core is compatible with the AMBA APB 2.0 bus. It operates as a controller for writing data … Read More

8-bit CAN Controller

with No Comments

Overview PE-CAN-8B is designed to be compatible with CAN 2.0A and CAN 2.0B standard. This IP core has the parallel port which is used to connect easily to microcontroller. Four transmitted and received buffers with the programmable priority level support … Read More

1 2